wallpapering with gift wrap {tutorial}

I often get an idea in my mind for a room {like, wallpaper for the back wall of the laundry room} and I search and search for what my imagination pictures.  Sometimes I find what I’m looking for; most of the time I don’t. Or maybe I find it, but it is way beyond my budget.

Which is why I am a DIYer.

And it’s also why I used giftwrap on my laundry room walls instead of real wallpaper.

The idea was originally executed in the nursery with my very favorite metallic peony gift wrap. I had searched for a real wallpaper that was similar and never could find it, so I ordered a stack of gift wrap and glued it to her bedroom wall.  This was all done before I began blogging {which means no photos} so I thought I’d take the opportunity to share with you how I did it this second time around in our laundry room.

Before we begin, here’s the most important tip: use thick paper.

The thinner the paper, the more likely it will wrinkle and look funky. My friend tried wallpapering a closet wall with a cute roll of glossy giftwrap and it did not work. So do your best to find thick paper without a sheen. And if you can find one with a repeat pattern or a random one that you don’t need to match up {like in Audrey’s room}, this project will go much more smoothly.

Okay, so let’s talk about what you’ll need:

:: gift wrap {either sheet or roll}. remember: thick!
:: wallpaper paste {I ordered this as my hardware stores do not carry wallpaper paste}
:: foam roller, tray, foam brush
:: scissors, pencil, exacto knife
:: clean rag
:: optional but helpful: yardstick, glue dots, squeegee

STEP ONE: tack up your first section of paper using glue dots {or an extra set of hands}. Roughly pencil any areas that need to be trimmed, being sure to leave a few inches overlap to be precisely trimmed later.

STEP TWO: roll a thin coat of wallpaper paste to the top section of paper and adhere to wall, smoothing with hands, clean rag or squeegee.

Continue to add paste in sections going down the length of the paper. I ended up just rolling it onto the wall and then pressing the paper down.

STEP THREE: trim around edges using an exacto knife

STEP FOUR: secure all edges with a foam brush and paste {this was easier than the roller for little areas}

STEP FIVE: Once your first piece is up, you can add the next piece – matching the pattern at the seam.

You can see the wrinkles in the photo above. Once the paper dried, most worked themselves out. There are a few remaining air pockets, but they are hardly noticeable.

DETAILS:

I used this wrapping paper from Paper Source.

The wall in this room took about 1 1/2 rolls of paper.

The project from start to finish took about 3 hours.

I love how it turned out.

Questions? Please ask and I’ll gladly answer!